The KRISS Vector is a series of weapons based upon the parent submachine gun design developed by the American company KRISS USA, formerly Transformational Defense Industries (TDI). The Vector uses an articulated mechanism referred to as the “Kriss Super V”, which allows the bolt and an inertia block to move downward into a recess behind the magazine well. The theory is that at the end of this travel, the energy is transmitted downward rather than rearward, thus reducing the felt recoil. When fired, the barrel axis is in line with the shoulder as in the M16 rifle, but also in line with the shooter's hand. This is intended to reduce muzzle climb when combined with the off-axis bolt travel, though it also greatly raises the sight line in comparison to the bore axis. The initial prototype model by TDI achieved a rate of fire of 1,500 rounds per minute, though this was brought down to around 1,200 rounds per minute on the production models. These guns were also built to accept standard Glock 21 magazines which aid in the modularity of the firearm.

A scale Resin printed, high detail model. 

Available 1/35, 1/32, 1/24, 1/18 and 1/16
Please select scale required

1/16 and 1/18 are supplied with 1 gun that is separated into gun, stock, sight and silencer 

1/24 is supplied with 1 complete gun with separate silencer 

1/35 and 1/32 are suppled with 2 complete guns. 1 with silencer, the other without

Please Read:
All models are supplied unpainted in grey or black resin and are removed from sprue/supports before shipping. Most models will require construction for which a good quality Super Glue will be required. Note that some models contain very fragile parts. If instructions are deemed necessary they will be included in the listing's images. Please ensure that you are happy with the model content as shown in the images before purchase.