The Vickers K GO (Gas Operated) was originally a Royal Air Force observers gun as it had a high rate of fire which made it suitable for shooting at high speed planes and getting as many bullets on target in the short space of time in which a plane would have been visible and in range. In 1943, the Browning Machine Gun replaced the Vickers as the primary weapon in aircraft so they were effectively made redundant. However, the Special Air Service found that the Vickers K gun was an ideal weapon for the types of missions which they would be undertaking. The high rate of fire made it so the SAS would be able to get as many bullets into the target without having to stay on the ground longer than necessary. The SAS mounted the guns on their jeeps usually in pairs with two at the front and two at the back and then a single piece was sometimes mounted on the drivers side wing so the driver could get provide additional support as necessary.

A scale Resin printed, high detail model. 

Available 1/35, 1/32, 1/24, 1/18 and 1/16
Please select scale required

2 x single ammunition drums 

1 x Stack of 3 drums with 'biscuit tin' 

1/24 

4 x single ammunition drums 

2 x Stack of 3 drums with 'biscuit tin'

3 x Stack of 3 drums in 'biscuit tin'

Please Read:
All models are supplied unpainted in grey or black resin and are removed from sprue/supports before shipping. Most models will require construction for which a good quality Super Glue will be required. Note that some models contain very fragile parts. If instructions are deemed necessary they will be included in the listing's images. Please ensure that you are happy with the model content as shown in the images before purchase.