The Wehrmacht-Einheitskanister, as it was known in Germany, was first developed in 1937 by the Müller engineering firm in Schwelm to a design by their chief engineer Vinzenz Grünvogel. Among others, the Wehrmacht had specified that a soldier should be able to carry either two full containers or four empty ones, which is the reason the triple handles were fitted. To achieve the required filling and draining speed, it was fitted with a large spout and flip top closure. A hole in the closure retainer made it possible to fit a securing pin or wire with a lead seal. The rectangular shape made it stackable. The recessed welded seam stiffened the container and protected the seam from impact damage. The indentations ensured a full can would not be severely damaged when falling from a vehicle, while a dip coat of paint on the inside protected it from corrosion. By 1939 the German military had thousands of such cans stockpiled in anticipation of war. Motorised troops were issued the cans with lengths of rubber hose in order to siphon fuel from any available source, a way to aid their rapid advance through Poland at the start of the Second World War

A scale Resin printed, high detail model. 

Available 1/35, 1/32, 1/24, 1/18 and 1/16
Please select scale required

Available as: 

2 x Jerry Cans 

2 x Jerry Cans plus vehicle mounting rack 

3 x Jerry Cans 

3 x Jerry Cans vehicle mounted 

4 x Jerry Cans 

4 x Jerry Cans vehicle mounted 

Note: at this scale, the writing on the side of the cans is not legible

Please Read:
All models are supplied unpainted in grey or black resin and are removed from sprue/supports before shipping. Most models will require construction for which a good quality Super Glue will be required. Note that some models contain very fragile parts. If instructions are deemed necessary they will be included in the listing's images. Please ensure that you are happy with the model content as shown in the images before purchase.